With the development of petrochemical production, there are more and more large-scale equipment. Due to the limitation of transportation conditions, the equipment that exceeds the limit can only be transported to the site in sections or pieces, and these semi-finished equipment can be assembled and assembled at the construction site. Align, weld, inspect and assemble into a whole device. The structure is simple, and large-scale equipment such as oil tanks and gas cabinets are built by the construction company on-site. In short, with the rapid development of the chemical industry, its technical content is also getting higher and higher, therefore, the installation of chemical equipment must be done well. According to the installation characteristics of chemical equipment, we should pay attention to the main points and precautions of chemical equipment in the early stage of installation, during the installation process and the stage of equipment installation and trial operation, and strengthen the construction management of chemical equipment installation.

Petrochemical equipment installation must-see

Before the Dalian petrochemical equipment is installed, the equipment foundation must be handed over and accepted, and the elevation reference line, vertical and horizontal center lines should be clearly drawn on the foundation, and the corresponding buildings should be marked with coordinate axes. water focus. The installation of equipment generally adopts two different methods: horn and no horn. The installation method mainly depends on the quality of the equipment, the structural type of the base and the distribution of the load.

Before the equipment is installed in place, simply rinse the foundation surface where the horn group is placed with water, remove the accumulated water, stack a certain amount of cement mortar and then put the horn group on. The installation of chemical equipment has the characteristics of high technical requirements, strong comprehensiveness, and many risk factors, which lead to the installation of chemical equipment has higher requirements for installation technology.

During the installation process, the manufacturer of chemical equipment and related installation technicians should be arranged in time to provide technical training to operators and maintenance personnel to enable them to understand the use and maintenance of newly installed equipment.